Typical sensors are easily influenced by environmental changes in humidity, causing a drop in performance. To combat this, the UX2 Sensor was designed using the same technology as our built-in LCD monitor calibrators. Compared to the previous model, the UX2 Sensor is more resistant to humidity and impact and carries out stable measurements and performance for long-term reliability.
The UX2 Sensor is equipped with an LED indicator to indicate when the sensor is successfully connected to the monitor. Furthermore, it has a protective cap that prevents the calibrator from becoming dirty when not in use, ensuring continued quality performance.
The UX2 Sensor has a black and white design to match our range of RadiForce medical monitors. Its EIZO original design displays a white ring around the side for a simple and lightweight design.
When used in combination with our medical monitor quality control software RadiCS, the UX2 Sensor complies with quality control standards of various countries such as JESRA, AAPM and DIN; ensuring uniform brightness and gradation according to these standards.
When used in combination with our medical monitor control quality software RadiCS, the UX2 Sensor is able to calibrate with high precision according to DICOM Part 14 standards, correcting for changes in monitor characteristics caused by aging.
The UX2 Sensor can be easily connected by plugging it into the monitor via USB, and then connecting the monitor to the PC via USB.
| RadiForce Monochrome Monitors | 5MP GX550, GX540, GX530, GS521-ST, GS521, GS520, GS510 |
|---|---|
| 3MP GX340, GX320, GS320, GS310 |
|
| 2MP GX240, GX220, GS220 |
|
| RadiForce Colour Monitors | 8MP RX850, RX840-MG, RX840, MX315W |
| 6MP RX660, RX650 |
|
| 5MP RX560 |
|
| 4MP RX440, RX430, MX300W |
|
| 3.7MP MX270W |
|
| 3MP RX350, RX340, RX320 |
|
| 2.3MP MX242W, MX241W, MX240W, MX220W |
|
| 2MP RX250, RX240, RX220, RX211, MX215, MX210 |
|
| 1MP RS110, MX194, MX191 |
|
| Quality Control Software & Tools | QC Software & Calibration Sensor RadiCS UX2 |
